Furnace filters are one of the most commonly talked about furnace components, but a lot of people still don’t know how to properly maintain them.
Furnace filters catch dust, hair and other debris in the air before the air enters the blower fan in your furnace. This subsequently improves the air quality in your home by preventing debris from recirculating in the air.
This all sounds great, and it also makes it seem as though the more resistant the filter is, the better it is for your home – but that is not the case.
If your filter is either too dirty or too resistant it can cause airflow problems hurting efficiency and performance. To determine resistance, filters use the MERV rating system. In short, the higher the MERV rating is, the more resistant the filter is. MERV rating is essential for finding the proper furnace filter for your home.
So what does MERV stand for anyways?
MERV is short for “Minimum Efficiency Reporting Value”. While the air filter is meant to control the amount of unwanted air particles entering your home, the MERV rating on your filter is meant to show you which filter is the best fit for your home. The higher the MERV rating, the fewer particles and other contaminants will be allowed into your home.
Sounds pretty simple, obviously you would want the least amount of particles as possible, right?
While the highest MERV ratings are the most effective for air quality, they can harm your HVAC system.
A higher MERV rating means a higher resistance, which means less airflow. When researching HVAC systems, airflow will come up a lot. That’s because it’s very important for the performance and longevity of your furnace or your air handler. Airflow is also the key to a comfortable home.
If the MERV rating on your furnace is too high, it may force your furnace to work too hard and leave it vulnerable to damages. In addition, you may not get the air velocity required to reach all parts of your home leaving inconsistencies in temperature.
The ratings for MERV range from 1-20. As the rating increases, the minimum size of the particles filtered out gets lower, meaning more particles are captured. The ratings can be grouped together in the size of particles they filter, see below for a chart listing those groupings:
|MERV||Minimum Particle Size|
|1–4||> 10.0 μm|
|17–20||< 0.3 μm|
A μm is a micrometre, which is one millionth of a metre. At the very lowest MERV rating (1-4), your filter will still capture pollen, dust mites, cockroach debris, sanding dust, spray paint dust, textile fibers and carpet fibers. Filters within a MERV rating of 17-20 are almost never necessary in a residential home.
A MERV rating of 13-16 is considered hospital level air quality, so it is unlikely your home needs any more than that. According to the United States Environmental Protection Agency, filters from the 7-13 range often have little difference from the higher MERV ratings, but they will allow your system to run much more efficiently.
What MERV rating you choose between 7 and 13 depends on what level of filtration you require. If your family has allergies or asthma, a higher MERV rating will be good for you. If your family doesn’t suffer from any breathing difficulties, a lower filter like a 7 will save you some money on your energy bill.
You should also remember to replace your filter every month, three months, six months or year depending on the filter. If you don’t replace your filter according to its recommendations, it gathers dirt and dust, making it more restrictive and less effective at filtering. If you have any questions about your specific home, feel free to ask a Home Aire Care professional.